robinia-pro ROSE SUPPORT Octagon

Finally, a convincing rose support to support rose bushes and shrubs all around – durable, stable, stylish.

Robinia wood, from which the rose support is made, is by far the most durable and strongest native wood - see Properties of Robinia Wood. It lasts for many years without chemical treatment. It is only treated with pure linseed oil, which further increases its longevity. The extraordinary strength of Robinia wood allows the rose support to be designed so slender.

The nearly round (octagonal) crossbars at the top allow the shoots/branches to rest "softly" on them, without pressure points. You can also tie the shoots/branches to the crossbars to distribute them evenly.

Please consider what length/width of the rose support you need and what height. For this, imagine where the shoots/branches should rest.

The rose support is delivered as a kit. First, you assemble the eight sides, each consisting of a pointed rod (viewed from the left outside) and a shorter blunt rod (viewed from the right outside), as well as the crossbar at the top and a crossbar at the bottom (same rods). Then, you join four side parts to form one half of the rose support (see image 2 in the gallery). Now, place the two halves under the perennial/shrub together and screw them together (image 3 in the gallery). Finally, press the rose support into the ground with the tips of the rods until the rose support rests more or less on the lower crossbars; this way, the rose support is fixed in place.

The required screws are included. They are made of stainless steel, so they last as long as the Robinia wood.

Here, the rose support has an octagonal shape. We also offer square and rectangular shapes, as well as all shapes with a frame (see below).